USGS-NWQL: I-5425: Lithium, recoverable-from-bottom-material, dry wt, FLAA
|
Official Method Name
|
Lithium, atomic absorption spectrometric, direct |
|---|---|
|
Current Revision
| 1985 |
|
Media
|
SOILS/SEDIMENT |
|
Instrumentation
|
Flame Atomic Absorption |
|
Method Subcategory
|
Inorganic |
|
Method Source
|
|
|
Citation
|
Methods for the Determination of Inorganic Substances in Water and Fluvial Sediments, Techniques of Water-Resources Investigations of the United States Geological Survey, Book 5, Chapter A1 Edited by Marvin J. Fishman and Linda C. Friedman |
|
Brief Method Summary
|
Lithium is determined by flame atomic absorption spectrometry by direct aspiration of the sample solution into an air-acetylene flame (Fishman and Downs, 1966). The procedure may be automated by the addition of a sampler and either a strip-chart recorder or a printer or both. |
|
Scope and Application
|
This method may be used to analyze bottom material containing at least 1 ug/g of lithium. Prepared sample solutions containing more than 1,000 ug/L need either to be diluted or to be read on a less expanded scale. Recoverable lithium in bottom material needs to undergo preliminary digestion-solubilization by method I-5485 before being determined. |
|
Applicable Concentration Range
|
at least 1 ug/g of lithium |
|
Interferences
|
The following elements interfere when the indicated concentrations are exceeded: sodium, 1,000 mg/L; potassium, 100 mg/L; magnesium, 200 mg/L; calcium, 200 mg/L; chloride, 1,000 mg/L; sulfate, 2,000 mg/L; nitrate, 100 mg/L; and strontium, 5,000 ug/L. |
|
Quality Control Requirements
|
Calibrate instrument using calibration standards (CAL). Quality control samples (QCS) and laboratory blanks (LB) analyzed at a minimum of I each after every 10 samples |
|
Sample Handling
|
Container Description: 500 mL Polypropylene bottle, wide-mouth. Treatment and Preservation: No treatment, preservation or special shipping requirements |
|
Maximum Holding Time
|
180 days |
|
Relative Cost
|
Less than $50 |
|
Sample Preparation Methods
|
I-5485 |
